Stihl MS162 Bars & Chains

Stihl MS162 bars and chains for this compact homeowner saw.

Standard specification is 3/8" Low Profile (Picco / PM3) × .043" (1.1mm) gauge. Typical lengths are 12" (44 drive links), 14" (50 drive links) and 16" (55 drive links).

Shop MS162 stock including genuine Stihl factory bars alongside high-quality aftermarket options from Sugihara, Oregon, Cannon and Tsumura.

Always match the pitch, gauge and drive-link count stamped on your current bar or chain. Matching chains are available from Oregon, Husqvarna, Stihl, Panther and Sugihara. To view compatibility, choose your bar first then view chains in the bar product page.

14 Produkte

How to measure for Stihl MS162 bars and chains

Always match these three numbers exactly:

  • Pitch – 3/8" Low Profile (Picco / PM3)
  • Gauge – .043" (1.1mm)
  • Drive-link count – 44 (12"), 50 (14"), 55 (16")

Check the stamp on your bar or chain. MS162 uses the 3005/A074 mount.

Common sizes for the MS162

  • 12" – 3/8" Low Profile .043" – 44 drive links
  • 14" – 3/8" Low Profile .043" – 50 drive links
  • 16" – 3/8" Low Profile .043" – 55 drive links

Stihl MS162 FAQs

What chain pitch and gauge does the MS162 use?

Standard specification is 3/8" Low Profile (Picco / PM3) × .043" (1.1mm) gauge. Always confirm the numbers stamped on your existing chain or bar.

What drive-link counts are common for MS162 bars?

Typical counts are 44 drive links for 12", 50 drive links for 14", and 55 drive links for 16". Match the exact count shown on your current bar or manual.

Does the MS162 share bars with the MS170 or MS180?

Yes. The MS162 uses the same Stihl (3005/A074) mount, so bars and chains with the correct pitch, gauge and drive-link count are interchangeable.

Can I use aftermarket bars and chains on the MS162?

Yes. Genuine Stihl bars and high-quality aftermarket options from Sugihara, Oregon, Cannon and Tsumura are available.