Stihl MS170 & MS180 Bars and Chains

Stihl MS170 and MS180 bars and chains for the most common UK homeowner saws.

Standard spec is 3/8" Lo Pro (Picco / PM3) × .043" (1.1mm) gauge. The usual 14" bar is 50 drive links; the 16" bar is 55 drive links. 12" bars are 44 drive links.

This collection covers the MS170, MS171, MS180, MS181 and closely related models that share the Stihl Group 1A mount. We stock genuine Stihl factory bars alongside high quality aftermarket options from Sugihara, Oregon, Cannon and Tsumura.

Always check the pitch, gauge and drive-link count stamped on your current bar before ordering.

Choose your chainsaw bar below, compatible chain drivelink counts and type are listed on the bar product page. Matching chains are available from Oregon, Husqvarna, Stihl, Panther and Sugihara.

14 products

How to measure for Stihl MS170 & MS180 bars and chains

Always match these three numbers exactly:

  • Pitch – 3/8" Low Profile (also called Picco or PM3). Stamped on the drive links or printed on the original packaging.
  • Gauge – .043" (1.1mm). Also stamped on the drive links or packaging.
  • Drive-link count – total number of drive links on the chain. Common counts for this mount are 44 (12"), 50 (14") and 55 (16").

You can also read the specification from the guide bar or your chainsaw manual. Matching pitch, gauge and drive-link count ensures the bar and chain fit the Stihl Group 1A mount used on the MS170, MS171, MS180 and MS181.

Common sizes for MS170 & MS180

The most common UK specifications are:

  • 12" – 3/8" Low Profile .043" – 44 drive links
  • 14" – 3/8" Low Profile .043" – 50 drive links
  • 16" – 3/8" Low Profile .043" – 55 drive links

This collection covers the MS170, MS171, MS180, MS181 and closely related models that share the Stihl Group 1A mount. We stock genuine Stihl factory bars alongside high-quality aftermarket options.

Stihl MS170 & MS180 FAQs

What chain pitch and gauge do the MS170 and MS180 use?

Standard specification is 3/8" Low Profile (Picco / PM3) × .043" (1.1mm) gauge. Always confirm the numbers stamped on your existing chain or bar.

What drive-link counts are common for 12", 14" and 16" bars?

Typical counts are 44 drive links for 12", 50 drive links for 14", and 55 drive links for 16". Match the exact count shown on your current bar or manual.

Which models does this collection cover?

It covers the MS170, MS171, MS180, MS181 and closely related models that share the Stihl Group 1A mount.

Can I use aftermarket bars and chains?

Yes. We stock genuine Stihl bars and high-quality aftermarket options from Sugihara, Oregon, Cannon and Tsumura that match the Group 1A mount and 3/8" Low Profile .043" specification.