Sugihara Chainsaw guidebars. The number 1 bar on the market today. Explore and shop the full range below.

Sugihara Pro Laminated bars

Sugihara Pro Laminated guide bars. These bars are similar to Oregon Pro Lite and Pro Am and Stihl Rollamatic chainsaw bars. They have a sandwich construction with two pieces of steel welded together and the internal space filled with a punched blank. Sugihara Pro Laminated guide bars
are more economical and lighter in weight but are still the stiffest and longest lasting laminated bars on the market.

Se alle

Sugihara Light Type Pro bars

Sugihara Light Type Pro guide bars. Manufactured the same way as the Red Label Pro Solid bars but with sections removed and filled with white resin. This retains most of the characteristics of the solid bar whilst making the bar lighter. Sugihara Light Type Pro chainsaw guide bars are sought after for their high performance and light weight. They are easily recognised by the white resin sections and Black Label. The most striking looking bar on the market

Se alle

Sugihara Pro Solid bars

Sugihara Pro Solid guide bars. Formed and cut from a single piece of steel. They have the best durability and stiffness characteristics with a polished lacquered finish. Ultimate durability and performance mean this is the benchmark bar. These bars carry a Red Label.

Se alle

Sugihara Carving Dime bars

Part of the new Sugihara tough carving range – thicker tougher carving bar which will withstand higher heat and harder handling. Heavier than the equivalent Light Type version. Hard wearing stellite tip is welded and finished by hand on every bar. For Dime Tip bars only 1/4 pitch chain may be used. These Dime Tip bars have a nose radius of 9mm.

Se alle

Sugihara Carving Quarter bars

Part of the new Sugihara tough carving range – thicker tougher carving bar which will withstand higher heat and harder handling. Heavier than the equivalent Light Type version. Hard wearing stellite tip is welded and finished by hand on every bar. Quarter Tip bars can run 1/4 or 3/8 Lo Pro chain. For 1/4 chain this bar runs 1/4 .050 68 drive links go to the Custom chain loop Stihl 1/4 carving chain to buy.

Se alle

Sugihara Carving R7 bars

Pro solid version of the smallest tip you can have – pro solid body provides a stiffer and more durable bar. These very small tipped bars from Sugihara have a tip radius of only 7mm hence the name R7 (Dime Tip bars are usually 9mm-10mm) and should only be used for very fine detailing work. Will only run with 1/4″ .043 picco chain on saws less than 30cc. For carvers who want the ultimate detail bar

Sugihara Carving Tonnie bars

Toonie tip bars have a nose radius of 20mm.For maximum versatility this bar
has been designed so you can run either 325 .050 Oregon 95TXL 80 drive links OR 3/8″ Lo Pro .050 72 drive links.