PC-4-SW Panther 13′[4.0m] Comprehensive First Cut Track System for Logs up to 3.5m 40″[100cm] SUPER WIDE VERSION

This wider kit is a good all rounder for the big boy mills! 60″[150cm]+. You can use it for wider mills and larger logs but there is more chance of the mill ‘see sawing’.

You can find extra sections and parts for it by clicking here.

No need to fish around for all the parts you need – this comes with the lot and you save ££ [not many to be fair – a few!]. We have revised this kit so support angle brackets are now held by 13mm bolts which are much cheaper than the adjustable handles. 4m covers most people for most logs but of course you can always add more sections to do longer logs. With the STANDARD RUNGS this system also runs the Panther Intersect Mill [click here for more details on this].

What you get:

• 4x FCH002C-SW 40mm 1st Cut System Rung 30″[90cm] SUPER WIDE
• 4x FCH001N Replacement 45mm Profile Length 80″[200cm] PM80+1st Cut Systems
• 4x CM00-LV Panther Adjustable Levelling Support
• M14 14mm Ratchet Spanner
• D3613 13mm Ratchet Spanner
• 12x FCH0135 Large Slide Nut M8 [45mm Large Mills]
• 16x PB-EHB First Cut System External Corner Bracket [With Fixings]
• PBA4 4mm Allen Key
• PB-A3 3mm Allen Key
• PBA6 6mm Allen Key
• 8x PB-LJ Panther Linear Joiner [Joins Panther First Cut Lengths]
• 2x CM001B Panther Mill Supports – Short [182mm], M8 Bolt and Large Slot Nut
• 2x CM001A Panther Mill Supports – Long [245mm], M8 Bolt and Large Slot Nut
• PFKH Panther Fixing Kit for HEAVY First Cut Systems
• HINGE-KIT Stainless End Joining Hinge Kit [You Get a Pair] For First Cut Systems

You need to overhang your log each end enough to be able to enter and exit the log easily.

Rungs are pre drilled to allow hex bolts to fix the set up to the log. These sections easily attach together so you can keep adding more and more length to your first cut system. Made of sturdy 45mm profile, pre drilled rungs made of 40mm profile. This is the full complete kit but you can always extend and widen it at a later date [find the parts to do this HERE]