[S5-66] CAG1-SP1-66-63-4 Cannon Slotted 66″[162cm] .404 .063 180 drive links

This listing is for the bar only.

Currently we only have the Cannon Bars for Panther Mills in 66″[same drive link count as GB 64″] and 50″ lo pro[same drive link count as GB 48″]. In 4 months we may an 86″ version as well. These have the slot and hole for fixing to the Panther mill as well as x2 oiler holes ready drilled for the Panther oiler kit!

Made from formulated, cold rolled, annealed, heat treated, surface ground, and stress relieved steel. This provides the best possible characteristics of wear resistance, strength, durability, straightness and elasticity.

The Cannon SuperBar power plus profile maximizes cutting power and chain speed while reducing damage from loose chain.

A precision ground groove to within .002″ means straighter cuts. Each groove is individually centered for even rail wear and superior durability. This increases rail strength and reduces damage from pinches. Also, if the chain rides exactly square to the rail, the result is smoother and straighter cutting. Milling marks, commonly found in the competitions bars, are eliminated. Thus, the groove is tighter and sloppy chain travel occurs much less.

Cannon SuperBars have flame tempered rails that are hardened to 5 points more than the tie straps on the chain for much longer bar life. This hardening penetrates deep to allow for multiple bar repairs and rebuilds. With the chain running straight and true, the result is a faster and smoother cut.

These bars are multi mount meaning they will fit direct to the large Stihl saws but they will require the adapter GB914 [click here to find this] to fit to the Husqvarna 3120XP.

Bars are slotted for Panther mills but this does not effect general use of cross cutting and non ripping sawing of timber.

Stihl saws – no adapter required

050, 051, 070, 075
076, 08, 084, 090
088, MS880

Husqvarna saws – requires GB914 adapter found here.

2100, 2101, 3120XP