Panther HD Double Ended Chainsaw Mill. Comes with chainsaw for the far end of the mill. These set ups are designed to run with x2 chainsaws for best effect [these are not included with this kit]. The mill is built using heavy duty 45mm profile is the biggest toughest mill you will find on the market.

What do you actually get for your $$

HSDS108-63D GB 108″[274cm] Double Ended Milling Bar Mill up to 90″[228cm] Logs – For Stihl & Husqvarna Saws .404 .063 279 drive links
2x GB1214 Chainsaw Bar Adapter 12mm 14mm Medium Stihl D025 to Large Stihl A031
2x GB914 Chainsaw Bar Adapter 9mm 14mm Large Husky D009 to Large Stihl A031
P-404-FSR .404 .063 279 drive links
PM95-B Panther Horizon Heavy Chainsaw Mill 95″[240cm] Bare Mill [No Bar or Chain]
x8 33842 Grub Screw M8x8 Cup point
CM045 2mm Spacer Washer for Double Ended Panther Mills

What saws can I use? Most of these saws will all work fine in whatever combination you have. NB: check the drive rims are both running the same size chain. If you go with 3/8 chain make sure your saws both run 3/8 or if .404 make sure both saws are running .404

For more info on double ended milling research this article on Arbtalk here

Chains that match

(P+404-FSR) Full Skip Ripping Chain .404 .063[1.6mm] [ONLY 148|180|196|222]

Part Number P+404-FSR
$0.79
(P+404-FSR) Full Skip Ripping Chain .404 .063[1.6mm] [ONLY 148|180|196|222] quantity

If you are seeing this we cannot make the chain length you require at this time likely we can from Sept 2014 onwards]

Add to
(P+404-HSR) Hyper Skip Ripping Chain .404 .063[1.6mm]

Part Number P+404-HSR
$0.79
(P+404-HSR) Hyper Skip Ripping Chain .404 .063[1.6mm] quantity
Add to
(P+404-R) Ripping .404 .063[1.6mm]

Part Number P+404-R
$0.79
(P+404-R) Ripping .404 .063[1.6mm] quantity
Add to
(P-404-FSR) Full Skip Ripping Chain .404 .063[1.6mm]

Part Number P-404-FSR
$0.71
(P-404-FSR) Full Skip Ripping Chain .404 .063[1.6mm] quantity
Add to
(P-404-HSR) Hyper Skip Ripping Chain .404 .063[1.6mm]

Part Number P-404-HSR
$0.71
(P-404-HSR) Hyper Skip Ripping Chain .404 .063[1.6mm] quantity
Add to
(P-404-R) Ripping .404 .063[1.6mm]

Part Number P-404-R
$0.71
(P-404-R) Ripping .404 .063[1.6mm] quantity
Add to
27R Oregon Ripping .404 .063[1.6mm] [Long Term Out of Stock Instead Use P-404-R]

Part Number 27R
$0.75 Out of Stock
27RA Oregon Full Skip Ripping Chain .404 .063[1.6mm]

Part Number 27RA
$0.75
27RA Oregon Full Skip Ripping Chain .404 .063[1.6mm] quantity
Add to
27RX Oregon Hyper Skip Ripping Chain .404 .063[1.6mm]

Part Number 27RX
$0.75
27RX Oregon Hyper Skip Ripping Chain .404 .063[1.6mm] quantity

The chain is not available in the size you requested. Please select Panther P-404-HSR chain. If no luck then please call or whatsapp +447752 145001 (whatsapp is generally the faster option).

Add to
3668-46RM Stihl Micro Chisel .404 .063[1.6mm]

Part Number 36680000
$0.90
3668-46RM Stihl Micro Chisel .404 .063[1.6mm] quantity
Add to
3946-46RS Stihl Chisel .404 .063[1.6mm]

Part Number 39460000
$0.90
3946-46RS Stihl Chisel .404 .063[1.6mm] quantity
Add to
3958-46RCX Stihl Ripping .404 .063[1.6mm]

Part Number 39580000
$0.90
3958-46RCX Stihl Ripping .404 .063[1.6mm] quantity
Add to
59ACL Oregon Chipper .404 .063[1.6mm]

Part Number 59ACL
$0.75
59ACL Oregon Chipper .404 .063[1.6mm] quantity
Add to
59L Oregon Full Chisel .404 .063[1.6mm]

Part Number 59L
$0.75
59L Oregon Full Chisel .404 .063[1.6mm] quantity
Add to
68JX Oregon Full Skip Chisel .404 .063[1.6mm]

Part Number 68JX
$0.90
68JX Oregon Full Skip Chisel .404 .063[1.6mm] quantity
Add to

5.2mm[13/64″] Diamond Coarse – Sharpens 3/8 Chains [New Style]

Part Number DS G1364CHPC-ES
$14.95
5.2mm[13/64"] Diamond Coarse - Sharpens 3/8 Chains [New Style] quantity
Add to
5.2mm[13/64″] Diamond Coarse – Sharpens 3/8 Chains [Old Style]

Part Number DS G1364CHPC
$29.91
5.2mm[13/64"] Diamond Coarse - Sharpens 3/8 Chains [Old Style] quantity
Add to
5.2mm[13/64″] Diamond Fine – Sharpens 3/8 Chains [Old Style]

Part Number DS G1364CHPF
$29.91
5.2mm[13/64"] Diamond Fine - Sharpens 3/8 Chains [Old Style] quantity
Add to
5.5mm[7/32″] Diamond Coarse – Sharpens .404 and 3/8 Chains [New Style]

Part Number DS G732CHPC-ES
$14.95 Out of Stock
5.5mm[7/32″] Diamond Fine – Sharpens .404 and 3/8 Chains [New Style]

Part Number DS G732CHPF-ES
$14.95 Out of Stock
534370 Oregon Wooden File Handle

Part Number 534370
$4.11
534370 Oregon Wooden File Handle quantity
Add to
56050071030 Stihl Filing Pouch with 5.5mm[7/32″] Sharpens .404 Chains

Part Number 56050071030
$50.10
56050071030 Stihl Filing Pouch with 5.5mm[7/32"] Sharpens .404 Chains quantity
Add to
56057504330 Stihl File Holder + File 5.5mm[7/32″] Sharpens .404 Chains

Part Number 56057504330
$16.73
56057504330 Stihl File Holder + File 5.5mm[7/32"] Sharpens .404 Chains quantity
Add to
8114907860 Stihl Wooden File Handle

Part Number 08114907860
$4.22
8114907860 Stihl Wooden File Handle quantity
Add to
A5.5 5.5mm[7/32″] Carbide Sharpening Burr – Sharpens .404 and 3/8 Chains [Trial price]

Part Number A5.5
Original price was: $22.43.Current price is: $11.22. Out of Stock
LC10081-732 Vallorbe File Holder + File 5.5mm[7/32″] Sharpens .404 Chains

Part Number LC10081-732
$18.62
LC10081-732 Vallorbe File Holder + File 5.5mm[7/32"] Sharpens .404 Chains quantity
Add to
Oregon 5.5mm[7/32″] Chainsaw Files x12 – Files .404 and 3/8 Chains

Part Number 70502
$27.10
Oregon 5.5mm[7/32"] Chainsaw Files x12 - Files .404 and 3/8 Chains quantity
Add to
Oregon File Holder and File 5.5mm[7/32″] – Files .404 and 3/8 Chains

Part Number Q13252C
$16.45
Oregon File Holder and File 5.5mm[7/32"] - Files .404 and 3/8 Chains quantity
Add to
Panther Diamond 5.5mm[7/32″] Chainsaw File x1 – Files .404 and 3/8 Chains

Part Number 55MM-732-DIA
$11.22 Out of Stock
Vallorbe 5.5mm[7/32″] Chainsaw Files Three Pack – Files .404 and 3/8 Chains

Part Number LC10004-03-732
Original price was: $12.34.Current price is: $8.97.
Vallorbe 5.5mm[7/32"] Chainsaw Files Three Pack - Files .404 and 3/8 Chains quantity
Add to
Vallorbe 5.5mm[7/32″] Chainsaw Files Twin Pack – Files .404 and 3/8 Chains

Part Number LC10002-732
$8.22 Out of Stock
Vallorbe 5.5mm[7/32″] Chainsaw Files x12 – Files .404 and 3/8 Chains

Part Number LC10000-03-732
$37.01
Vallorbe 5.5mm[7/32"] Chainsaw Files x12 - Files .404 and 3/8 Chains quantity
Add to
Vallorbe Plastic File Handle with File Angles

Part Number AL240
$6.17
Vallorbe Plastic File Handle with File Angles quantity
Add to

Navigation

Stihl saws (no adapter required)

Stihl saws (adapters supplied)

Husqvarna saws (adapters supplied)

PHD95-GB108 Panther HD Double Ended Heavy Chainsaw Mill 95″[240cm] Milling Width 90″[228cm] .404 .063 279 drive links

What do you actually get for your $$

For more info on double ended milling research this article on Arbtalk here

Chains that match

(P+404-FSR) Full Skip Ripping Chain .404 .063[1.6mm] [ONLY 148|180|196|222]

(P+404-HSR) Hyper Skip Ripping Chain .404 .063[1.6mm]

(P+404-R) Ripping .404 .063[1.6mm]

(P-404-FSR) Full Skip Ripping Chain .404 .063[1.6mm]

(P-404-HSR) Hyper Skip Ripping Chain .404 .063[1.6mm]

(P-404-R) Ripping .404 .063[1.6mm]

27R Oregon Ripping .404 .063[1.6mm] [Long Term Out of Stock Instead Use P-404-R]

27RA Oregon Full Skip Ripping Chain .404 .063[1.6mm]

27RX Oregon Hyper Skip Ripping Chain .404 .063[1.6mm]

3668-46RM Stihl Micro Chisel .404 .063[1.6mm]

3946-46RS Stihl Chisel .404 .063[1.6mm]

3958-46RCX Stihl Ripping .404 .063[1.6mm]

59ACL Oregon Chipper .404 .063[1.6mm]

59L Oregon Full Chisel .404 .063[1.6mm]

68JX Oregon Full Skip Chisel .404 .063[1.6mm]

5.2mm[13/64″] Diamond Coarse – Sharpens 3/8 Chains [New Style]

5.2mm[13/64″] Diamond Coarse – Sharpens 3/8 Chains [Old Style]

5.2mm[13/64″] Diamond Fine – Sharpens 3/8 Chains [Old Style]

5.5mm[7/32″] Diamond Coarse – Sharpens .404 and 3/8 Chains [New Style]

5.5mm[7/32″] Diamond Fine – Sharpens .404 and 3/8 Chains [New Style]

534370 Oregon Wooden File Handle

56050071030 Stihl Filing Pouch with 5.5mm[7/32″] Sharpens .404 Chains

56057504330 Stihl File Holder + File 5.5mm[7/32″] Sharpens .404 Chains

8114907860 Stihl Wooden File Handle

A5.5 5.5mm[7/32″] Carbide Sharpening Burr – Sharpens .404 and 3/8 Chains [Trial price]

LC10081-732 Vallorbe File Holder + File 5.5mm[7/32″] Sharpens .404 Chains

Oregon 5.5mm[7/32″] Chainsaw Files x12 – Files .404 and 3/8 Chains

Oregon File Holder and File 5.5mm[7/32″] – Files .404 and 3/8 Chains

Panther Diamond 5.5mm[7/32″] Chainsaw File x1 – Files .404 and 3/8 Chains

Vallorbe 5.5mm[7/32″] Chainsaw Files Three Pack – Files .404 and 3/8 Chains

Vallorbe 5.5mm[7/32″] Chainsaw Files Twin Pack – Files .404 and 3/8 Chains

Vallorbe 5.5mm[7/32″] Chainsaw Files x12 – Files .404 and 3/8 Chains

Vallorbe Plastic File Handle with File Angles

Related products

[S1-12-043] 30050007605 Stihl Rollamtic E Mini Light 12″[30cm] 3/8 Lo Pro .043 44 drive links

[S4-NS] SNHS30-50WR-KIT 30″[76cm] GB Lo Pro Milling Bar[Single Slot]+Chains Kit 3/8 Lo Pro .050 98 drive links

Granberg Milling Kit 54″[137cm] GB Pro Bar LARGE STIHL .404 .063 148 drive links

[S4-NS] SNHDS25-50WR-KIT 25″[63cm] GB Lo Pro Milling Bar+Chains Kit 3/8 Lo Pro .050 84 drive links