AU-HSD87-63D 87″[221cm] Double Ended Milling Kit – Mill up to 72″[182cm] Logs – For Stihl & Husqvarna Saws .404 .063 226 drive links

Double ended Granberg based milling kit. Use with x2 chainsaw powerheads OR with one large powerhead and supplied helper handle. Each of these kits comes with a super heavy duty GB double ended bar and adapters to use with different chainsaws. If you are considering a double ended kit also click here to check out our super heavy duty double ended Panther mills which are made from a 45mm profile. You get x1 chain with this but really you need at least one back up chain so scroll down to see options and prices. Included in package is a breaker and mender kit to shorten/lengthen chains as different saws can mean slightly different drive link counts.

(If you need additional Ripping Chains these are displayed at very bottom of page).

What you get:

• G778-72 NEW 72″ Granberg Mk IV Chainsaw Mill
• HSD87-63D Double Ended Milling bar.
• Oregon 27RX .404 .063 226 Drive Links Ripping Chain  (make sure drive sprockets are .404)
• FKW2 Full winching kit Mk II
• Eco-AO Oiler Kit
• G791 Granberg Helper handle with roller
• 2x GB914 and 2x GB1214 bar adapters to adapt both Stihl and Husky saws
• 4x 5.5″ K H Wedges 2x 10″ K H Wedges
• 24548B/24549B Oregon Breaker and Mender Package

Read our article on arbtalk here to see more info on double ended milling.

What size logs can which size set ups mill?

• AU-HSD50-63D 50″ Double Ended Milling Kit will mill logs up to 36″ (90cm) diameter
• AU-HSD60-63D 60″ Double Ended Milling Kit will mill logs up to 46″ (116cm) diameter
• AU-HSD72-63D 72″ Double Ended Milling Kit will mill logs up to 58″ (147cm) diameter
• AU-HSD87-63D 87″ Double Ended Milling Kit will mill logs up to 72″ (182cm) diameter
• AU-HSD98-63D 98″ Double Ended Milling Kit will mill logs up to 84″ (212cm) diameter

More videos on double ended milling and set up

Double ended milling set up and use

Massive oak milling Romsey

Hedge trimming then Giant Redwood Milling

Giant Sycamore Part 1

Giant Sycamore Part 2

What saws can I use? Most of these saws will all work fine in whatever combination you have. NB: check the drive rims are both running the same size chain.

Stihl saws (no adapter required)

050, 051, 070, 075
076, 08, 084, 090
088, MS880

Stihl saws (adapters supplied)

024, MS240
026, MS260, MS261
027, MS270, MS271
028, MS280, MS281029, MS290, MS291
034, MS340, MS341
036, MS360, MS361, MS362
038, MS380, MS381
039, MS390, MS391
041, 044, MS440, MS441
045, MS450, MS451
046, MS460, MS461
048, 065, MS650, MS651
064, MS640, MS641
066, MS660, MS661

Husqvarna saws (adapters supplied)

61, 64, 65, 66, 70, 77, 160, 162
163, 180, 181, 185, 260, 263, 266
268, 272, 280, 281, 285, 288, 298
365, 365XP, 371, 372XP, 380, 385XP
390XP, 394XP, 395XP, 575XP, 576XP