Navigation

If you are looking to getting into chainsaw carving please read this post on arbtalk here.

 

Chainsaw carving is NOT like standard chainsaw use – ie. you can’t simply strap on a carving bar and do carving – we broke our first carving bar and shortly after broke the chainsaw… please learn by our mistakes! We did not follow the below..

 

  1. Chain is SLACK – no where near as tight as a standard bar, it should be hanging off the underside of the bar
  2. R7 bars running 1/4 .043 are SUPER delicate and only used for very fine detail work
  3. Carving is mainly done with the saw at half throttle [or thereabouts] – very different from standard work where most cuts are with full throttle
  4. Carving bars take longer to bed in – run them gently and ensure they don’t get hot for the first couple of tanks [which means carve for a minute – rest a minute – carve for a minute = rest for a minute… ]
  5. Take the heels of the cutter teeth to reduce friction [Stihl 3661-13RMS already has this feature] but click here to see more on this.

 

[U1-NS] CCQ-C1-16-43 Cannon Carving Quarter 043 16″[40cm] 3/8 Lo Pro .043[1.1mm] 60 drive links or .325 .043[1.1mm] 67 drive links or 1/4″ .043[1.1mm] 85 drive links

$243.01

Add to
Stock 20
Part Number CCQ-C1-16-43
Weight 231g
Part Number CCQ-C1-16-43 Category:
Durability
Stiffness
Cut speed

Made from formulated, cold rolled, annealed, heat treated, surface ground, and stress relieved steel. This provides the best possible characteristics of wear resistance, strength, durability, straightness and elasticity.

The Cannon SuperBar power plus profile maximizes cutting power and chain speed while reducing damage from loose chain.

A precision ground groove to within .002″ means straighter cuts. Each groove is individually centered for even rail wear and superior durability. This increases rail strength and reduces damage from pinches. Also, if the chain rides exactly square to the rail, the result is smoother and straighter cutting. Milling marks, commonly found in the competitions bars, are eliminated. Thus, the groove is tighter and sloppy chain travel occurs much less.

Cannon SuperBars have flame tempered rails that are hardened to 5 points more than the tie straps on the chain for much longer bar life. This hardening penetrates deep to allow for multiple bar repairs and rebuilds. With the chain running straight and true, the result is a faster and smoother cut.

Product Highlights

    • Available in .325″, .375″ or .404″ pitch single rivet sprocket noses
    • Motor mounts available for most makes and models of chainsaws
    • Precision squared and flame hardened rails
    • Stress relieved heel prevents cracking and reduces vibration
    • Available in .050, .058 or .063 gauge
    • Available in lengths from 16 to 84 inches
    • Precision ground groove

 

Checkout these videos to get more a flavour of how carving works

 

‘Cannon bars are awesome. I wish I’d have brought this small one much sooner’  Samantha Possinger

‘Well – they always seem to last the longest. Cannon are the best. This one’s going on my Stihl MS201’ Ant Beetlestone

‘All round reliability’  Lorraine Botterill

‘I’m currently replacing all my bars for Cannon bars…in my opinion they’re the best’ Rolande Urwin

Additional information

Weight 231 g

Related products

Back to top
Translate »

Orders for United States of America must be a minimum of $180.

For all UK orders from Monday 25th Sept there will be no longer be a minimum order but a flat rate of £4.95+vat will be charged to all orders.

Click here for more info for shipping costs